Foam sprayed across the underside of a roof between timber trusses.

Home / Open or closed cell

Open cell vs closed cell spray foam, explainedOpen cell or closed cell?

Two kinds of spray foam. We spray both. Here’s where each one goes and why.

100% recommend on Facebook, from 6 reviews

Pictured: foam on the underside of a shop roof we sprayed.

The short answer

Open cell is the lighter, softer foam for attics and walls. Closed cell is the denser, firmer one for metal buildings, crawlspaces and basements.

Costs less
Open cell
Stronger vapor barrier
Closed cell
Adds strength
Closed cell
Depends on
The area and your goals: comfort, humidity, strength, moisture

Where each one goes

Three places, drawn.

Each drawing is a wall or a floor cut through, the way a builder would sketch it.

Looking down on a metal building wall: the ribbed steel panel outside, closed cell foam sprayed on its inside face, and the steel girts behind it. OUTSIDEINSIDE Steel wall panel Closed cell foam Girt
Looking down on a metal building wall.

Closed cell

Metal buildings

Sprayed on the inside face of the steel panel. Denser and firmer, with a stronger vapor barrier, and it adds structural strength to the wall.

Spray foam for shops and metal buildings
Looking down on a wood-frame wall: sheathing outside, studs drawn as boxes with a cross, open cell foam filling each bay to the depth of the studs, and a dashed line where the sheetrock goes. OUTSIDEINSIDE Sheathing Open cell foam Sheetrock goes on after Stud
Looking down on a wood-frame wall.

Open cell

Attics and walls

Sprayed into each stud bay before the sheetrock goes on. Lighter and softer, it expands more to fill the bay and seal the air. The cheaper of the two.

Spray foam for homes and barndominiums
A crawlspace from the side: the subfloor on top, floor joists hanging under it drawn as boxes with a cross, closed cell foam sprayed under the subfloor and down the joists, and the ground below. FLOOR ABOVEGROUND Subfloor Closed cell foam Joist
A crawlspace, from the side.

Closed cell

Crawlspaces and basements

Sprayed under the subfloor and down the joists. The stronger vapor barrier goes on the side of the floor that faces the ground.

Spray foam for homes and barndominiums

Side by side

The two foams, line by line.

From the guide we first posted in January 2026.

Compared onOpen cellClosed cell
What it’s likeLighter and softer. It expands more.Denser and firmer, with a higher R-value.
SealAir seal.Air seal, plus a stronger vapor barrier.
Good to knowNot a vapor barrier.Adds structural strength.
CostThe cheaper of the two.Costs more.
Where it usually goesAttics and walls.Metal buildings, crawlspaces and basements.

Questions we get

Short answers.

Each answer in a line or two, all of it from the guide we posted in January 2026.

Is open cell a vapor barrier?

No. Open cell seals air but it is not a vapor barrier. Closed cell is the one with the stronger vapor barrier.

Which one costs less?

Open cell is the cheaper of the two.

Which one goes on a metal building?

Closed cell is the usual choice for metal buildings, and for crawlspaces and basements.

Which one goes in an attic?

Open cell is the usual choice for attics and walls.

Which one adds strength?

Closed cell. It is denser and firmer, and it adds structural strength.

Can a building get both?

Yes. A house often gets open cell in the attic and walls and closed cell in the crawlspace.

What if I’m not sure?

Call (210) 288-9665 and tell us what you’re building. The right foam depends on the building and your goals.

Something we didn’t cover?

Call (210) 288-9665 and ask. Every building’s a little different.

Call about your build

Not sure which?
Call and ask.

Tell us what the building is and what you want from it. We’ll tell you which foam goes where.

(210) 288-9665

“Best spray foam job I’ve ever seen.”

Patrick G., on Facebook, August 2024